一步一步教你折纸飞机，世界上最好的纸飞机

How to build the best paper airplane in the world

Note: to see a complete video of the folding instructions, go to Paper Airplane Google Video. You can start and stop the video as needed to help while folding. The link will open a separate window.

1. Start with an ordinary sheet of 8 1/2" x 11" - 21.6 x 28 cm (U.S.standard writing paper size). The exact size is not important, it should be rectangular and not square. The paper should be at least 20 Lb. bond or copy paper.

2. Fold over the left hand corner as shown.

3. Crease

4. Result

5. Fold over the right hand corner.

6. Crease

7. Result

8. Carefully close in the sides as shown.

9. Fold down the center line from front to back.

10. Fold the resulting left hand tip up as shown.

11. Crease along the bottom edge.

12. Repeat the same procedure on the right section.

NOW GO TO STEPS 13 to 24

Model airplane instructions steps: | 1 to 12 | 13 to 24 | 25 to 35 |

.. continued from steps 1 to 12

13. Fold the left hand point back.

14. Crease

15. Mirror the same folds on the right panel.

16. Bend the left panel as shown.

17. Crease from back to front only 2/3 of the way.

Note: to see a complete video of the folding instructions, go to Paper Airplane Google Video. You can start and stop the video as needed to help while folding. The link will open a separate window.

I have received a large number of requests for clarification of steps 17 and 18. For detailed instructions of steps 16, 17 and 18, go to detailed instructions. For additional help go to the animation to view an animated sequence of these folds. You can also view a Flash animation if your browser is equipped with a Flash plug-in.

18. Study photos 18 and 19 carefully. These folds are difficult to describe. Try to duplicate them as shown in the photos.

19. Mirror the folds on the right.

20. Turn the plane over and fold the point back and crease as shown.

21. Turn the plane over again. The result should be similar to the photo.

22. Crease wing as shown.

23. Moisten the crease with your tongue. Do this slowly and carefully or you could receive a painful paper cut on your tongue.

24. Carefully tear off strip of paper. Save the strip of paper because you are going to need it to make the tail.

NOW GO TO STEPS 25 to 35

Model aircraft instructions steps: | 1 to 12 | 13 to 24 | 25 to 35 |

... continued from steps 13 to 24

25. To make the tail, fold down the center of the strip of paper to form a trough.

26. Tear as shown to form control surfaces. The folds should be parallel with the bottom of the trough.

27. Fold wings up.

28. Fold the right wing down as shown in photos 28 and 29. Take special care to angle this fold in such a way so that the leading edge of the wing is slightly higher than the trailing edge.

29. Study this photo and you will see that the fold is not exactly parallel with the trough at the bottom but slightly angled as described in photo 28.

30. The plane should look like this at this point.

31. Bend the wingtips up.

32. Insert tail into slot under wing.

33. Finished at last!

34. Aircraft shown with landing gears down. Note: the craft does not fly as well with the gears down.

35. Ready to fly! - IMPORTANT: For instructions on how to fly the model airplane, go to How to fly it.

Recommendation for an alternate T-tail design. A suggestion for improving the paper airplane.
Specifications for making the paper airplane legal for world record competition.
How to make the paper airplane with a Guinness rules compliant tail.
A one sheet guide for folding the paper airplane in Adobe Acrobat format.
Paper airplane assembly instructions in slide-show format. (Flash required)

Model airplane instructions steps: | 1 to 12 | 13 to 24 | 25 to 35 |


| Home page - Best paper airplane in the world | How to fly it | Top of page |